SAPHO shop

Betöltés...

Kérem várjon...

.nojs-msg { width: 50%; margin:20px auto; }

Nagyon sajnáljuk...

a Javascript le van tiltva a böngészőjében, kérjük engedélyezze és frissítse a lapot.

Kosár

Betöltés ..

TWIN COMBI csatlakozó készlet radiátorhoz, króm (CP5012)

Ajánlott fogyasztói ár ÁFÁ-val	84 000 Ft /db
Megtakarítás	0,0 %
Az Ön ára ÁFA nélkül	66 142 Ft /db
Az Ön ára ÁFA-val	84 000 Ft /db
ÁFA	27%

Márkanév	Sapho
Széria
Rendelési kód	CP5012
Garancia	24 hónap
Súly	0,96 kg
Szín	Króm
Csomag	1 db
Fűtési Lehetőség	Kombinált fűtés
Bekötési Távolság	50 mm
Kivitel	Termosztástos, fej bal odladlon; Középső bekötés 50 mm
Jótállás	2 év

TWIN COMBI

Design corner valve with thermostatic head designed for radiators with a central connection of 50 mm with an internal thread G1 / 2 ". It is suitable for connections where the customer assumes a combination with an electric heater. The valves are equipped with O-rings for reliable and quick installation.

color: chrome
connection spacing 50mm
corner design
thermostatic head on the left side

ATTENTION!
When ordering the set, it is necessary to order a compression fitting (not included), see accessories.

The water supply is at the thermostatic head.

The non-return valve is hidden under the decorative cover. It is closed with a hexagonal key. It does not serve to regulate the temperature, only to close the pipes, eg in the case of dismantling the radiator, without the need to drain the heating medium.

Dual fuel heating

Dual fuel towel rails combine two types of heating - central and electric. They can be connected to the central heating system, and also to an electric socket. We recommend a heating rod with the same or similar performance according to the specification of the radiator.

If you have a heater with a central connection, in depends on whether the heating rod can be connected via a valve (in such case a combination valve is used) or whether the rod is connected separately to the side part of the radiator (using a conventional valve). In case of a side connection, a combination valve is always used. There is a choice of using a manual valve or a valve with a thermostatic head

Manual valve: the valve control head can be installed on the left/right side regardless of the hot water supply location. The temperatur eis controlled manually.
A valve with a thermostatic head: the integrated thermostat maintains the temperature inside the towel rail. The thermostatic head must be located at the hot water inlet (except MONO ONE).

The connection valves we offer are supplied with a clamping fitting for the most common pipes (O15 mm for copper and O16 mm for Alupex), so there is no need to buy anything else for the connection. For covering the inlet pipes and holes in the wall, we recommend the addition of cover rosettes.