SAPHO shop

Betöltés...

Kérem várjon...

.nojs-msg { width: 50%; margin:20px auto; }

Nagyon sajnáljuk...

a Javascript le van tiltva a böngészőjében, kérjük engedélyezze és frissítse a lapot.

Kosár

Betöltés ..

CUBE COMBI csatlakozó készlet szett, sarokszeleppel, szögletes, jobbos, króm (CP561)

Ajánlott fogyasztói ár ÁFÁ-val	132 000 Ft /db
Megtakarítás	0,0 %
Az Ön ára ÁFA nélkül	103 937 Ft /db
Az Ön ára ÁFA-val	132 000 Ft /db
ÁFA	27%

Márkanév	Sapho
Széria
Rendelési kód	CP561
Garancia	24 hónap
Súly	1,09 kg
Szín	Króm
Csomag	1 db
Fűtési Lehetőség	Kombinált fűtés
Kivitel	Oldalsó
Jótállás	2 év

CUBE COMBI

Design set of manual valves without thermostatic head for connecting square design radiators with G1 / 2 "female thread
The valves are fitted with O-ring seals for reliable and quick installation.
The set is suitable for connecting radiators, where the customer expects a combination with an electric heater.

color: chrome
corner right design

ATTENTION!
When ordering the set, it is necessary to order a compression fitting (not included) - see. accessories.

The non-return valve is hidden under the decorative cover. It is closed with a hexagonal key. It does not serve to regulate the temperature, only to close the pipes, eg in the case of dismantling the radiator, without the need to drain the heating medium.

Dual fuel heating

Dual fuel towel rails combine two types of heating - central and electric. They can be connected to the central heating system, and also to an electric socket. We recommend a heating rod with the same or similar performance according to the specification of the radiator.

If you have a heater with a central connection, in depends on whether the heating rod can be connected via a valve (in such case a combination valve is used) or whether the rod is connected separately to the side part of the radiator (using a conventional valve). In case of a side connection, a combination valve is always used. There is a choice of using a manual valve or a valve with a thermostatic head

Manual valve: the valve control head can be installed on the left/right side regardless of the hot water supply location. The temperatur eis controlled manually.
A valve with a thermostatic head: the integrated thermostat maintains the temperature inside the towel rail. The thermostatic head must be located at the hot water inlet (except MONO ONE).

The connection valves we offer are supplied with a clamping fitting for the most common pipes (O15 mm for copper and O16 mm for Alupex), so there is no need to buy anything else for the connection. For covering the inlet pipes and holes in the wall, we recommend the addition of cover rosettes.