SAPHO shop

Betöltés...

Kérem várjon...

.nojs-msg { width: 50%; margin:20px auto; }

Nagyon sajnáljuk...

a Javascript le van tiltva a böngészőjében, kérjük engedélyezze és frissítse a lapot.

Kosár

Betöltés ..

STAR csatlakozó készlet szett, sarokszeleppel, króm (CP5020S)

Ajánlott fogyasztói ár ÁFÁ-val	94 000 Ft /pár
Megtakarítás	0,0 %
Az Ön ára ÁFA nélkül	74 016 Ft /pár
Az Ön ára ÁFA-val	94 000 Ft /pár
ÁFA	27%

úton

várhatóan
készleten: 23. héten 2024

Márkanév	Sapho
Széria
Rendelési kód	CP5020S
Garancia	24 hónap
Súly	1,01 kg
Szín	Króm
Csomag	1 db
Fűtési Lehetőség	Központi fűtés
Kivitel	Oldalsó
Jótállás	2 év

Including universal pipes adaptor for Cu (O15 mm) and Alupex (O16x2 mm). No need to order anything else to connect the heating radiator.
We recommend to buy a cover plate.

The check valve is hidden under the decorative cover. It is closed with a hexagonal key. It does not serve to regulate the temperature, only to close the piping, eg in the case of dismantling the radiator, without the need to drain the heating medium.

Central heating

In the case of central heating, the selection of the connection valves is very important. You can choose between using a manual valve or a valve with a thermostatic head.

Manual valve: the valve control head can be installed on the left/right side regardless of the hot water supply location. The temperatur eis controlled manually.
A valve with a thermostatic head: the integrated thermostat maintains the temperature inside the towel rail. The thermostatic head must be located at the hot water inlet (except MONO ONE).

The connection valves we offer are supplied with a clamping fitting for the most common pipes (O15 mm for copper and O16 mm for Alupex), so there is no need to buy anything else for the connection. For covering the inlet pipes and holes in the wall, we recommend the addition of cover rosettes.