SAPHO shop

Betöltés...

Kérem várjon...

.nojs-msg { width: 50%; margin:20px auto; }

Nagyon sajnáljuk...

a Javascript le van tiltva a böngészőjében, kérjük engedélyezze és frissítse a lapot.

Kosár

Betöltés ..

COLONNA fürdőszobai radiátor, 298x1800mm, 614W, metál mokka (IR142)

Ajánlott fogyasztói ár ÁFÁ-val	198 000 Ft /db
Megtakarítás	0,0 %
Az Ön ára ÁFA nélkül	155 906 Ft /db
Az Ön ára ÁFA-val	198 000 Ft /db
ÁFA	27%

Márkanév	Sapho
Széria	COLONNA
Rendelési kód	IR142
Garancia	24 hónap
Súly	18,30 kg
Szín	Metál mokka szín
Szélesség	298 mm
Magasság	1800 mm
Csomag	1 db
Forma	I-forma
Fűtési Lehetőség	Központi fűtés
Bekötési Távolság, 50Mm	Szimmetrikus (középen)
Bekötési Távolság	50 mm
Hőmérsékleti Adatok	75/65/20 °C
Kivitel	Törölközőtartó: kiegészítőként (opció)
Méret	298x1800 mm
Űrtartalom	4.1 l
Alapanyag	Acél
Teljesítmény	614 W
Jótállás	2 év

The COLONNA lamella radiator is designed not only for bathrooms, but also for other rooms or as a heating wall or architectural element. We recommend in combination with a practical towel holder made of polished stainless steel. Only with central connection with a spacing of 50 mm. The color variants of the radiators of this series will not only heat the bathroom, but will also affect its atmosphere. They are aesthetic and in combination with a towel holder also practical.

Connecting valves are not included in the package
An electric heating rod cannot be used with radiators
1 to 2 towel holders can be placed on the radiator (not part of the radiator)

Central heating

In the case of central heating, the selection of the connection valves is very important. You can choose between using a manual valve or a valve with a thermostatic head.

Manual valve: the valve control head can be installed on the left/right side regardless of the hot water supply location. The temperatur eis controlled manually.
A valve with a thermostatic head: the integrated thermostat maintains the temperature inside the towel rail. The thermostatic head must be located at the hot water inlet.

The connection valves we offer are supplied with a clamping fitting for the most common pipes (O15 mm for copper and O16 mm for Alupex), so there is no need to buy anything else for the connection. For covering the inlet pipes and holes in the wall, we recommend the addition of cover rosettes.